Sluiting is a kind of sling, which is widely used in various industries such as electric power, metallurgy, petroleum, machinery, railway, chemical industry, port, mining, construction and so on. Sluitings are the same as other slings. They have their own set of application and invalidation specifications. Note for the use of sluitings: The sluitings must correctly support the load.
Dat wil zeggen, de effectkracht moet langs de as van de hartlijn van de beugel liggen om buigen en onstabiele belastingen te voorkomen, om nog maar te zwijgen van overbelasting. Het gebruik en de ongeldigverklaring van desluiting should be rolled flexibly in the lifting hole, and no jamming is allowed. Phenomenon: The sluiting body must not bear the effect of lateral bending moment, that is, the effect bearing capacity should be in the plane of the body.

De maximale ingesloten hoek tussen de tuigage met twee poten gedragen door desluiting cannot be greater than 120 degrees. The use and invalidation of sluitings The sluiting is that when the wire rope sling is used as a binding sling, the horizontal pin part of the sluiting should be connected with the keyhole of the wire rope sling. The appearance is when the rigging is lifted.

Het conflict tussen de staalkabel en desluiting causes the sluiting to roll, and there is a risk of detachment. The use and invalidation specifications of the sluiting. The pin is deformed up to 5% of the original size; the bolt is necrotic or slippery.